Tuesday, December 17, 2013
PRODUCT LAUNCH - Gas Control Leak Detection Spray
Gas Control is a technologically advanced gas leakage detection
spray, designed to test hermetic sealing of any type of gas
system. The liquid has a special formulation to inhibit
corrosion when used on copper, brass and steel. The liquid,
when applied will detect the slightest leak, forming bubbles or
foam where it occurs.
Gas Control is aerosol propelled with an easy to use Acc-U-Sol
Valve, that enables precise control when spraying joins. A
small extension tube may also be used to access those hard-to-reach
areas. Approved by DVGW to DIN EN 14291, Gas Control is
supplied in an aluminium container; it is lightweight, yet
robust. A safety tear-off tab on the Acc-U-Sol Valve ensures
that no contents will be emitted prior to first use, during
transport or storage. The containers are sold in a
carton of 12 that converts into an attractive point of sale
display.
Using Gas Control is easy. Simply tighten all of your
connections, then point the nozzle at the join and spray a small
amount of the Gas Control solution. You may attach the
extension tube if you wish to have more control of where the
solution is sprayed.
Once the solution has been sprayed onto the joins, any gas leak
will be evidenced by the formation of bubbles at the join.
In the event that bubbles form, simply tighten the joins
concerned until the bubbles stop forming. Although Gas
Control is formulated such that corrosion is inhibited when used on
copper, brass and steel, it is always good practice to wipe clean
all areas on which you spray Gas Control.
For the part number, brochure and
further information, please follow this link.
Jonathan Sage
Comments
Add Comment